2022
Frohn-Sörensen, P., Schreiber, F., Manns, M., Knoche, J., and Engel, B. (2022) Additive Manufacturing of TPU Pneu-Nets as Soft Robotic Actuators. In: A.-L. Andersen, R. Andersen, T.D. Brunoe, M.S.S. Larsen, K. Nielsen, A. Napoleone, and S. Kjeldgaard, eds. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Cham: Springer International Publishing, 269–276.
https://www.doi.org/10.1007/978-3-030-90700-6_30
Schreiber, F., Lippok, T., Bätzel, J.U., and Manns, M. (2022) Applicability of Snap Joint Design Guidelines for Additive Manufacturing. In: A.-L. Andersen, R. Andersen, T.D. Brunoe, M.S.S. Larsen, K. Nielsen, A. Napoleone, and S. Kjeldgaard, eds. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Cham: Springer International Publishing, 277–284.
https://www.doi.org/10.1007/978-3-030-90700-6_31
Tuli, T.B. and Manns, M. (2022) Comparison of AI-based Task Planning Approaches for Simulating Human-Robot Collaboration. In: A.-L. Andersen, R. Andersen, T.D. Brunoe, M.S.S. Larsen, K. Nielsen, A. Napoleone, and S. Kjeldgaard, eds. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Cham: Springer International Publishing, 158–165.
https://www.doi.org/10.1007/978-3-030-90700-6_17
Tuli, T. B., Henkel, M., & Manns, M. (2022). Latent Space Based Collaborative Motion Modeling from Motion Capture Data for Human Robot Collaboration. Procedia CIRP, 107, 1180–1185.
https://doi.org/10.1016/j.procir.2022.05.128
Tuli, T.B., Manns, M., and Jonek, M. (2022) Understanding Shared Autonomy of Collaborative Humans Using Motion Capture System for Simulating Team Assembly. In: A.-L. Andersen, R. Andersen, T.D. Brunoe, M.S.S. Larsen, K. Nielsen, A. Napoleone, and S. Kjeldgaard, eds. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Cham: Springer International Publishing, 527–534.
https://www.doi.org/10.1007/978-3-030-90700-6_59
2021
Jonek, M., Manns, M., and Tuli, T.B. (2021) Virtuelle Montageplanung mit Motion Capture Systemen/Virtual assembly planning with motion capture systems. wt Werkstattstechnik online, 111 (04), 256–259. 04
https://www.doi.org/10.37544/1436-4980-2021-04-78
Khosravani, M.R., Reinicke, T. (2021) Experimental characterization of 3D-printed sound absorber. European Journal of Mechanics – A/Solids, 89, 104304.
https://doi.org/10.1016/j.euromechsol.2021.104304
Khosravani, M.R., Soltani, P., Weinberg, K., Reinicke, T. (2021) Structural integrity of adhesively bonded 3D-printed joints. Polymer Testing, 100, 107262.
https://doi.org/10.1016/j.polymertesting.2021.107262
Khosravani, M.R., Schüürmann, J., Berto, F., Reinicke, T. (2021) On the post-processing of 3D-printed ABS parts. Polymers, 13, 1-13.
https://doi.org/10.3390/polym13101559
Khosravani, Reinicke, T. (2021) Fracture behavior of intact and defected 3D-printed parts. Procedia Structural Integrity, 31, 105-110.
https://doi.org/10.1016/j.prostr.2021.03.017
Manns, M., Tuli, T.B., and Schreiber, F. (2021) Identifying human intention during assembly operations using wearable motion capturing systems including eye focus. Procedia CIRP, 104, 924–929.
https://www.doi.org/10.1016/j.procir.2021.11.155
Schreiber, F. and Manns, M. (2021) Long-term cycle-tests of an additively manufactured soft ring-gripper. Procedia CIRP, 104, 798–802.
https://doi.org/10.1016/j.procir.2021.11.134
Tuli, T.B., Kohl, L., Chala, S.A., Manns, M., and Ansari, F. (2021) Knowledge-Based Digital Twin for Predicting Interactions in Human-Robot Collaboration. In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). Västerås, Sweden.
2020
Frohn-Sörensen, P., Geueke, M., Tuli, T.B. et al. 3D printed prototyping tools for flexible sheet metal drawing. Int J Adv Manuf Technol 115, 2623–2637 (2021).
https://doi.org/10.1007/s00170-021-07312-y
Khosravani, M.R., Berto, F., Ayatollahi, M.R., Reinicke, T. (2020). Fracture behavior of additively manufactured components: A review. Theoretical and Applied Fracture Mechanics, 109, 102763.
https://doi.org/10.1016/j.tafmec.2020.102763
Khosravani, M. R., Reinicke, T. (2020). Effects of raster layup and printing speed on strength of 3D-printed structural components. Procedia Structural Integrity, 28, 720–725.
https://doi.org/10.1016/j.prostr.2020.10.083
Khosravani, M. R., Reinicke, T. (2020). 3D-printed sensors: Current progress and future challenges. Sensors and Actuators A: Physical, 305, 111916.
https://doi.org/10.1016/j.sna.2020.111916
Khosravani, M. R., Reinicke, T. (2020). On the environmental impacts of 3D printing technology. Applied Materials Today, 20, 100689.
https://doi.org/10.1016/j.apmt.2020.100689
Khosravani, M. R., Reinicke, T. (2020). On the use of X-ray computed tomography in assessment of 3D-printed components. Journal of Nondestructive Evaluation, 39, 1-17.
https://doi.org/10.1007/s10921-020-00721-1
Khosravani, M. R., Zolfagharian, A., Jennings, M., Reinicke, T. (2020). Structural performance of 3D-printed composites under various loads and environmental conditions. Polymer Testing, 91, 106770.